All About Garage Door Repair Daily

Furnace Maintenance Checklist: 6 Easy Steps

Oct 15

As the weather starts to cool down, now is the time to start thinking about heating maintenance Edinburg TX. Much like your car, your furnace needs regular tune-ups to keep it running smoothly—and to prevent it from breaking down when you need it most.

Not sure where to start? This furnace maintenance checklist will help get you on the right track.

We Always Say This But Still---Check Your Air Filter!

The first step in any furnace maintenance checklist is to check your air filter. A dirty filter can restrict airflow and cause your furnace to work harder than it needs to—which can lead to a drop in efficiency and an increase in your energy bills.

To clean or replace your air filter, simply open up your furnace and remove the filter. If it looks clean, put it back in place. If it’s dirty, replace it with a new one.

Vacuum Around the Furnace—A Little Cleaning Goes a Long Way!

Next, use your vacuum cleaner to remove any dirt, dust, or debris that may have built up around your furnace over the past year. It’s important to keep the area around your furnace clean and clear so that air can flow freely and without obstruction.

Clean Your Furnace’s Burners (It’s a Must!)

Once you’ve replaced your air filter and vacuumed around the furnace, it’s time to move on and clean your furnace’s burners—the component responsible for igniting the gas used to heat your home.

To do this, simply remove the burner cover and use a wire brush or small screwdriver to scrape away any built-up dirt or debris. Once you’ve cleaned all of the burners, reassemble everything and put the cover back in place.

Inspect Your Heat Exchanger (Never Forget About Doing This!)

The heat exchanger is one of the most important parts of your furnace—and also one of the most expensive to replace if something goes wrong. That’s why step four of our heating maintenance Edinburg TX checklist is to inspect your heat exchanger for any cracks or damage that may have occurred over the past year.

Simply turn off power to the furnace at the breaker box and then remove the access panel so you can see inside. If you notice any cracks or damage, call a professional for repairs before turning the power back on and relighting the pilot light.

Test Your Thermostat (It Works Hand-in-Hand With Your System So Test It!)

One common cause of furnace problems is a broken thermostat—so make sure to test yours as part of your fall heating maintenance Edinburg TX routine!

Begin by setting your thermostat 5 degrees below its current temperature setting and then wait 10 minutes to see if the furnace kicks on. If not, check for loose wiring behind the thermostat cover plate; if everything looks okay there, you may need a new thermostat altogether.

Call a Professional (Let the Experts Do It!)

Even if you follow all of these steps perfectly, there are some tasks that are best left to a professional HVAC technician—like cleaning out your gas valve or inspecting your ductwork for leaks (two things that are included in our fall furnace tune-up service).

So if you want peace of mind knowing that your furnace is ready for winter, be sure to call the professionals for the job.  

With that, you can trust Colair to take care of heating maintenance Edinburg TX!  They are a family-owned and operated HVAC company with over 36 years of combined experience in the heating and air conditioning industry.

To schedule an appointment, you may call them at 956-255-2409 today!